![]() ![]() The general rule is that the bottom mount would be a darker colour which picks out a dominate colour in the artwork, whilst the top mount would be a lighter, neutral colour. By selecting two layers you will create a double mount that can be the same or contrasting colours. If you opt to have a mount you can select between one or two layers(single or double). It never, ever, ever, ever relates to the external size of the frame or the visible area from the front of the frame.įramed with Double Mount Single or Double Mount? The term 'Frame Size', which will be detailed throughout the order process and on any correspondence from us, will only relate to what fits inside the frame at the back such as the glazing and MDF backing board. Our full measuring guide can be found here. The frame size will automatically be adjusted by our website depending on how wide you set the mount borders to be. This is a useful option if the item you are framing doesn't need to be overlapped or you have already considered the overlap you want. However, our website also has the option to have the aperture cut to the exact size entered. As an example, if you enter 500 X 400mm as your sizes, the actual opening of the mount supplied would be 496 X 396mm to ensure a slight overlap of your image. We automatically make a small adjustment to ensure your image doesn't fall through the middle of the mount. ![]() If the item you are framing does require a mount you would enter the exact size of the image you are framing. The size you enter will relate to the opening in the middle of the mount. I am buying a picture frame WITH a mount. Therefore the actual visible area from the front will always be slightly less than the sizes entered. The lip(rebate) of the frame will overlap the internal contents (Glazing, Artwork, Backing, etc) by approximately 5mm on each side. The frame will be manufactured so the artwork fits perfectly into the opening at the back of the frame. ![]() You should enter the exact size of the item you are framing after considering any alterations such as trimming off a white border. what fits inside the frame such as the backing and glazing. The size you enter will relate to the opening at the back of the frame, i.e. I'd recommend this bike to just about anybody, although I might suggest looking into the internal gear options over the derailleur if possible.I am buying a picture frame WITHOUT a mount. Now it's one of my favorite bikes I've ever owned, and was well worth the investment. I've been using it pretty much daily over the last few months, putting it through its paces to make sure the issue has been resolved. I need to give huge props to the customer care team especially Danielle, whose hard work and communication made what would normally be a rage inducing experience pleasant. Which was resolved by a visit to the partner shop and then later on a visit to a local shop. My experience with this bike was not great to start though and I rolled unlucky when I originally got it, and had derailleur issues. It's great on the roads and has a surprising amount of power. It's a solid frame road bike so make sure you know the terrain you're going to be using it on, no off-roading obviously. First thing first, this is a very aesthetic bike and you're going to get a lot compliments on it. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |